What is the Vacuum Feeder ？
Vacuum loaders are a type of equipment for conveying materials. In a dust-free closed pipe, the pressure difference between the vacuum and the surrounding air is used to create an air flow that drives solid particles and powder materials.
The completely sealed design completely prevents dust leakage, ensuring 0 environmental pollution and the health of staff. At the same time, the use of airflow to convey materials prevents fragile materials from being damaged during transport.
In addition to this, the modular design allows the vacuum loading system to be quickly connected to other bagging machines, making it easy to install and operate. As a result, vacuum feeding machines are widely used in the plastics industry, chemical industry, food industry, etc.
|Conveying Distance||≤ 50m|
|Conveying Capacity||≤ 10T/h|
|Air Pressure||0.5-0.8 Mpa|
|Air Consumption||≤ 4.5 m³/min|
|Suction Calibre||≤ DN150|
|Lower Material Calibre||≤ φ300|
|Vacuum Silo Volume||≤ 250L|
Wxtytech vacuum feeder system is suitable for lighter weight, easily damaged granular or powder materials, using the negative pressure vacuum to transfer the material to the silo.
The vacuum load equipment is widely used in many industries, such as: the chemical industry, the construction industry, the plastic pellet industry, etc.
- Fully sealed design, pneumatic control, energy saving and environmental protection, low noise.
- Vacuum feeding to prevent material damage and avoid material waste.
- Simple operation and control, low running cost and low maintenance cost.
- Small design size, flexible movement and installation.
- Assembled with s-shaped curved flange, easy to disassemble and clean.
- Adopt curved sealing, no dust leakage, ensure the clean environment.
The combination of high-quality metal materials and branded accessories are manufactured into high quality auxiliary packaging equipment that perfectly meets your requirements and operates stably for a long time.
MT Weighing Controller（back）
MT Weighing Controller（front）
AIRTAC Pneumatic Components
Weighing Controller GM8802
MT Ripple Sensor
MT Load Cell
KELI Load Cell
Step 1： Raw Materials
Step 2： Drilling
Step 3： Cutting
Step 4： Folding
Step 5： Welding
Step 6： Programming
Step 7： Assembling and Debug
Step 8： Inspection
Step 9： Packing
Step 10： Container Loading